DOI:
https://doi.org/10.69717/jaest.v3.i2.58Keywords:
Laminated plates, Thermal buckling, Cut-outs, Finite element methodAbstract
In this work, the thermal buckling behaviour of laminated plates with rectangular cut-outs is studied using the finite element method. Based upon the classical plate theory, the used finite element is a combination of a linear isoparametric membrane element and a high precision rectangular Hermitian element. After validating the results obtained by the finite element, a parametric study is made using three types of materials commonly used in the industry, namely: the T300/5208 Graphite/Epoxy, the AS4/3501-6 Graphite/Epoxy and the E-glass/Epoxy. The study was about the effect of the size of the cut-outs, the boundary conditions, the stacking sequence and the stress resultants distribution on the critical buckling temperature. The study showed that the critical buckling temperature is strongly affected by the discussed parameters.
Downloads
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Mohamed-Ouejdi Belarbi, Abdelouahab Tati, Abdelhak Khechai, Houdayfa Ounis, A new 4-node quadrilateral element based on layerwise approach for free vibration analysis of laminate-faced sandwich plates , Journal of Applied Engineering Science and Technology: Vol. 2 No. 1 (2016): JAEST
Similar Articles
- Oussama Temami, Djamal Hamadi, Abdallah Zatar, Ashraf Ayoub, Experimental and numerical analyses of a thin cylindrical shell model , Journal of Applied Engineering Science and Technology: Vol. 2 No. 2 (2016): JAEST
- Salah Zerguine, Djamel Benmeddour, Abdallah Zatar, Numerical study of seismic earth pressures acting against a vertical retaining wall in frictional soil , Journal of Applied Engineering Science and Technology: Vol. 2 No. 1 (2016): JAEST
- Amar Rouag, Adel Benchabane, Adnane Labed, Nora Boultif, Thermal design of air cooled condenser of a solar adsorption refrigerator , Journal of Applied Engineering Science and Technology: Vol. 2 No. 1 (2016): JAEST
- Mohamed Labed, Mekki Mellas, Stability of geosynthetic reinforced embankments over stone column‐improved soft soil , Journal of Applied Engineering Science and Technology: Vol. 2 No. 2 (2016): JAEST
- Ismail Meghezzi-Larafi, Abdelouahab Tati, The effective length estimation of columns in semi-rigid jointed braced frames , Journal of Applied Engineering Science and Technology: Vol. 2 No. 2 (2016): JAEST
- Islam-Ncereddine El Ghoul, Ahmed Cheriet, Samir Bensaid, Ala-Eddine Lakhdari, FVM model and virtual instrument based system for electromagnetic characterization of steel material , Journal of Applied Engineering Science and Technology: Vol. 2 No. 2 (2016): JAEST
- Miloud Zellouf, Noureddine Moummi, Adnane Labed, Kamel Aoues, Multiple solutions for flow mode−transition in an inclined cavity generated by natural convection , Journal of Applied Engineering Science and Technology: Vol. 2 No. 2 (2016): JAEST
- Mohamed-Amine Khadraoui, Leila Sriti, Study and optimization of the windows’ impact on thermal comfort and energy efficiency (Case of offices in a hot and arid climate) , Journal of Applied Engineering Science and Technology: Vol. 4 No. 1 (2018): JAEST
- Charafeddine Beldjani, Kamel Aoues, Noureddine Belghar, Yousra Boutera, Mohamed Aymen Kethiri, CFD Analysis of Hybrid Photovoltaic Thermal (PV/Th) Solar Collector Efficiency Incorporating Ag-AL2O3/water Hybrid Nanofluids , Journal of Applied Engineering Science and Technology: Vol. 5 No. 1 (2025): JAEST
- Sara Sedira, Said Mazouz, Effect of urban morphology on thermal comfort in outdoor spaces: the case of the red village-El Kantara-Biskra , Journal of Applied Engineering Science and Technology: Vol. 4 No. 1 (2018): JAEST
You may also start an advanced similarity search for this article.